On this page, cookies are needed if you want to use the full range of the page. Please activate cookies and refresh that page. After refresh a cookie management dialogs will be available.

The cookie settings on this website are set to 'allow only strictly necessary' to give you the very best experience. If you continue without changing these settings, you consent to this - but if you want, you can change your settings at any time at the bottom of this page. Our cookie policy



B308 SDI2-Erweiterungsmodul, 8 Ausgänge
  • Programmable output functions
  • Easy to read switch addressing
  • Provides eight Form C relays
  • 1 A at 5-24 VDC relay contact rating
  • Allows remote control of outputs
  • Quick modular interconnect wiring connector
B208 SDI2-Erweiterungsmodul, 8 Eingänge
  • Programmable input point functions
  • Easy to read switch addressing
  • 2 interconnect wiring connectors
  • Provides eight points
B201 2-Draht-Schleife
  • Suitable for use with 2-wire smoke detectors and burglary devices
  • Supports up to 20 compatible smoke detectors
  • Resets latching devices from the control panel
  • Connects to the control panel terminal block with easy-to-install integrated pins
DX3010 Kopplerplatine (8 Ausgänge)
  • Die Platine enthält 8 Ausgänge, die unabhängig voneinander parametrierbar sind
  • Montage in einem abgesetzten D203 Metallgehäuse
DX2010 Kopplerplatine (8 Eingänge)
  • Bis zu acht Meldeleitungseingänge
  • Direkter Anschluss an den Datenbus der Zentrale
D8128D POPIT-Eingangsmodul, 8 Eingänge
  • Provides point identification for initiating devices
  • Expands the number of points in the system
  • DIP switch programmable
D8129 Ausgangsmodul, C-Relaisform, 8 Ausgänge
  • Programmable relay functions
  • Provides eight Form C relays
  • 1 A at 30 VDC relay contact rating
  • Slide switch configuration
  • Allows remote control of relays
  • Screw terminal connections
DS7432 Series Eight‑input Remote Modules
  • Address up to eight input loops
  • Serial dual end-of-line (EOL) wiring with tamper status (DS7432E)
DS7433 Series Eight‑input Modules
  • Expand up to 16 hard-wired control panel points
  • Compatible with DS7400Xi Series Control Panels
DS7436 Dual-Multiplex-Treiber
  • Provides a two-wire multiplex bus for the connection of up to 120 remote points
DS7457IE Multiplex-Modul, ein Eingang
  • Power-limited and supervised input zones
  • Compact enough to fit within most back boxes and enclosures
  • Address settings through DIP switches
DS7460I Eingangsmodul, zwei Meldergruppen
  • Supervises two protection loops
  • Can be used in UL Listed fire and security applications
  • DIP switch programmable
DS7465I Modul mit einem Ein-/Ausgang
  • Supervises one power-limited input zone
  • Provides one output relay
  • Can be used in UL Listed fire and security applications
  • DIP switch programmable